Table of Contents

MXL DS-03 Microphone Mount Table Stand Review

Wired Clip is a reader-supported site. Purchases made through links may earn a commission (at no cost to you). We appreciate your support. Learn more.

MXL DS-03 Microphone Mount

When designing a recording space for a podcast or production-type work, there will be quite a lot of items for your list.

With recording, getting the right microphone and accessories separates a professional from an amateur. 

If you use a microphone for extended periods of time, a reliable and flexible stand is just the thing you need, as an MXL-type stand can work if you need a simple solution or if you want to have one in a temporary studio setup.

Below you will find a complete overview of this stand and other accessories you’ll need to get the most out of your equipment, and perhaps you can find ways to make your experience even better. 

Overview Of The MXL DS-03

This microphone mount is very much simple but can be found online and gives you a sense of how convenient these types of mounts can be, as the main draw is that it fits with all microphones and is more dependent on the kind of mic clip you use.

With this, you get a mount that weighs 1 pound, has a foam ring on the bottom, so it doesn’t leave a mark, and is only 7 x 5 x 5 inches, so it can fit in the most limited of spaces while not feeling like a heavy weight to carry around.

Wired Clip is a reader-supported site. Purchases made through links may earn a commission, at no additional cost to you.

The weight might be an issue, as heavier and more complex mic setups that contain a boom arm or a shock mount may give you some stability issues, but this can be limited depending on what you intend to use your microphone for. 

For general podcasting, you shouldn’t have any issues as you may not see the use of a shock or pop filter, but with some recordings, you may notice plosives or any sounds of movement are picked up, so you can set up your mic and test how it sounds. 

Other Accessories To Consider

At some point, you might be thinking about taking things to the next level, and while this sounds great, some basics can get you on your way, so below, we have provided some of these you may want to add to your list. 

Dynamic Shock Mic Clip

As this doesn’t usually come with mic mounts, this practical accessory allows you to screw it into the base, and then you’re ready to clamp your mic, as these can be designed to reduce the effects of low-end rumble and vibrations, giving you a smoother sound. 

You can find these in a variety of opening sizes, but a 25mm one should be acceptable for use in most podcast setups, so for even more reassurance, you can enter the name of your mic and search for clips that are compatible with it.

The only time when you may need a different type is if you were to go with a shock mic mount with a pop filter attached, and with the fixed frame, you may need one that fits with this set, as you can sometimes find ones that come with their own mount and clips. 

Microphone Table Clamp

Perhaps you’re trying out different mount options, and you want something that’s fixed to the table, and if so, you could use something like this, which could be just as stable as the MXL DS-03 and has a male thread that attaches to any female thread on a clip. 

However, if you’re looking for something more dynamic and flexible to your mic setup, you could opt for a tripod-type stand that can be easily moved and prevent any damage or markings that a table clamp could produce. 

Microphone Gooseneck

If you like the idea of a stand but don’t need the boom arm for more reach, you could use a gooseneck which can be a subtle way to give your mic more flexibility without having to change the mount. 

The gooseneck mic stand has male and female threads, with sizes anywhere around ⅝” for stands or adapters and an inside diameter of .338”, but for these, it’s always best to check the size of adapters your mic is compatible with. 


Pop Filters

These are mainly used in higher-end production where you want to isolate a particular sound. Still, you may find you get interference which can ruin any type of recording, so even though you may not see the use for it, it’s recommended for any type of audio recording.

You can find mics with pop filters attached, or you can find foam coverings that aren’t necessarily used as windscreens but are good at reducing any surrounding noise and can instead protect your mic from spit or certain inflections, which can all be a nuisance. 

Cable Wrap

You want an organized recording space that doesn’t look like a mess with cable management, which can get messy pretty quickly.

Hence, the best thing to do here is to find efficient ways where you can feed the cable from the mic to your audio interface efficiently. 

You can find sizes to fit most setups, and there may be ways where you can connect your mics to other audio devices or USB options, so you may be able to use software to monitor and control how the audio comes out, which is a valuable tool to have. 

Further Reading: MXL990 Microphone Review

Closing Thoughts

These are just a few of the accessories you may need with your new mic mount, and you can find many to suit your needs and space, so it all depends on how you use it, as your needs may change over time, which can mean you’re due for an upgrade.

However you proceed, having a setup that is easy to manage and gives you plenty of mileage in terms of use is the key, as when starting out, you may have a limited budget with little room to go all out in one area while holding out on another.

Matt Brook

With a background in Journalism and years of experience in the industry, Matt brings a wealth of knowledge to the WiredClip team.

Share This Post

More To Explore