Table of Contents

Best Podcast Mic Stands

Wired Clip is a reader-supported site. Purchases made through links may earn a commission (at no cost to you). We appreciate your support. Learn more.

Best Podcast Mic Stands

When you are recording a podcast, the microphone stand will be as important as the microphone itself.

You’ll need something that will stay secure, either with a rubber stopper on the feet or with a clamp you can screw to the table.

Ideally, when you are recording a podcast, you should be completely hands-free. This is because a podcast microphone will pick up every sound and vibration that is coming through your hands.

So what are the best microphone stands that you can get for recording your podcast? How much will you have to pay for a decent microphone stand? What are good microphone stands made from?

Well, if you are looking for something decent for your next podcast, we would recommend that you keep reading.

#1 Gator Frameworks Short Weighted Base Microphone Stand

First up, we have a traditional microphone stand with a weighted base that will really help you to keep your microphone secure when you are recording your sound.

This microphone stand is completely adjustable and will give you everything that you need for a decent sound without any vibrations.

You can increase the height of this microphone to around 23 inches, which is great news for taller podcasters.

This comes with a solid weighted base which will keep your microphone fixed to the table. This is the perfect stand for use with your podcast table or if you have a musical instrument on the ground that you want to record.

This mic stand comes with a non-slip vibration-reducing gasket that you can be sure will give you everything that you need for completely clean sounds.

This comes with an adjustable arm, which is perfect for getting it right from all angles. This comes with a crank in the arm that will allow you to spin it in a lot of different directions.


  • Extendable – you can extend this to a whopping 23 inches, which is perfect if you are looking for something that can extend across your table.
  • Weighted base – this is very important if you are wanting something that will not wobble while you are adjusting your podcast notes.
  • Non-slip – this is very important when you are thinking about reducing the amount of wobble on the sound of your microphone.


  • Too heavy – some users have complained that they find this one very hard to pick up. This might be difficult if you have mobility issues.

#2 Rode PSA1

Next up, we have a microphone that will be great for keeping your microphone fixed to the table in numerous different positions.

This comes with a flexible arm that you can use to adjust the position of your microphone. You can even angle it right across a long table, which is perfect if you are sharing a microphone with someone else.

This is a very lightweight microphone arm, which is great if you want something that weighs just under 2kgs. This can be rotated around 360 degrees, which makes it one of the best microphones that you can use for multiple users.

This comes with a desk insert option, which will allow you to stand it straight up from any flat surface.

This also comes with clamps that you can use to attach to the surface edge of your table. This might offer you more stability and you won’t run the risk of knocking it over.


  • Can support heavy mics – if you have a heavy microphone and are worried about your mic stand collapsing or drooping, then we would recommend that you pick this one.
  • Adjustable – you can swivel this one 360 degrees or you can raise it up and down, this is the ideal microphone for unidirectional microphones.
  • Extends – this is great if you are podcasting across a large table and you are looking for something that will reach the mouth of more than one person.


  • Too small – some users have claimed that this one is way too small, which might not be that useful for anyone podcasting around a large table.

#3 Pyle Heavy Duty PMKS56

Next up, we have a podcast microphone that comes at full length, which is great for people who like to do it standing up.

This comes with legs that you can be sure will keep your microphone still while you are speaking into it. You can even use this one on inclined surfaces!

This comes with a T-band that you can use to adjust the level of your microphone. So if you are going to be talking and playing a musical instrument, this is a great versatile microphone for you to use.

This microphone is very heavy, so you won’t have to have it weighed separately. You can extend this arm up to 30 inches, which is great if you are going to be shifting your podcast mic between two different people.

You can even mount this one high up and have the microphone extend down from an angle. This will help you record many people simultaneously.

This is an extremely durable mic stand, which is great if you are going to be traveling with it.

That is another amazing thing about this mic stand, you can actually fold it up and easily put it in a bag. This makes it great for transporting it from one place to another.


  • Durable – this is one of the strongest mics on this list, coming with a great design and made from solid metal.
  • Universal mic handle – you can attach a lot of different styles of microphone to this mic stand, making it ideal for anyone recording podcasts and music.
  • Stable – with three legs each topped with a rubber stopper, then you won’t have to worry about falling over or slipping on shiny surfaces.


  • Not the best stand for podcasts – this microphone stand is more designed for music recording, but it can be used for podcasting, it just might not be as versatile as some of the other stands on this list.

#4 K&M Classic Two-Piece Telescopic Boom Arm

Next up, we have a telescopic microphone boom arm that will really help you when you are recording across a large table.

This microphone stand comes with a T-shaped locking mechanism that you can be certain will give you everything that you need for a solid microphone setup.

This is another microphone stand that comes with three legs that will allow you to establish a solid setup and will not transfer any vibrations from the stand to the microphone itself.

You can adjust this one quite highly, which is great if you like to stand up when you’re podcasting. You can also get this one at an angle, which is great if you are going to be going from sitting to standing.

This stand is very lightweight, which is great if you are looking for something that you can travel with. This is perfect for anyone who has a traveling podcast studio.

This can also fold up and will allow you to put it anywhere that you like.


  • A great all-round mic stand – this is ideal for anyone who is looking to have a microphone that is good for both podcasting and music recording.
  • Zinc manufacture – this comes with a solid zinc construction that will allow you to drop it accidentally without having to worry about it breaking.
  • Stable – this comes with three legs making it one of the best microphones for stability. It also comes with stoppers on the base that will keep it from shifting.


  • Not designed for podcasting specifically – this is more aimed at people recording music, which means that it might be harder to record podcast audio.

#5 K&M Tripod Microphone Stand

Now we have another microphone stand that is very tall and will help you to establish a decent sound setup that is both clean and professional.

This is a very weighty microphone stand that will enable you to knock into the microphone occasionally without it falling over.

This comes with a two-piece design that makes it very easy to assemble. This is great if you are looking for a mic stand that you can set up without having to look at the instructions.

It comes with a zinc design that is very sturdy, with rubber on the feet that will prevent it from sliding across the floor.

This comes with plenty of environmental protection, which makes it great if you are more conscious of the waste materials that you are putting out into the world.

This stand comes with foldable legs that will allow you to carry it anywhere you like in your bag. This is great if you have a traveling podcast studio.


  • Great construction – this is one of the best-made microphones on the market, coming with zinc and rubber construction.
  • T-bar locking – this is great for securing your microphone in place. It is especially good if you have a heavy microphone.
  • Good for music and podcasting – this is ideal if you are looking for an all-round microphone that will help you with recording your music and podcast.


  • Not made for recording podcasts – this might be difficult if you are trying to record podcasts, as it does not have the desired handle clasp.

Buyer’s Guide

When you are shopping for a decent microphone stand- you’ll need to make sure that you are looking for a few things: it will need to be durable, made from solid steel and have plenty of stability.

Here are a few things to look out for:

What Is It Made From?

Most of the microphone stands that we have listed above have been made from zinc, with rubber on the feet.

This is important for keeping it stable and making sure that no vibrations travel to the top of the microphone itself, as this will affect the sound.

Can You Mount It On A Table?

If you can secure this to the table, then this is a great feature. This is because most podcasts are done around a table and you might want your hands free to consult your podcast notes.

Is It Easy To Set Up?

This is also very important if you are podcasting for the first time. It is already difficult to get your podcast mic up and running with your audio software, it is important that your mic stand does not add any more to this stress.

Frequently Asked Questions

How Much Will A Decent Mic Stand For Podcasting Cost Me?

You shouldn’t have to pay more than $60 for a decent podcast mic stand, however, there are some more top-of-the-range models that will cost you a little bit extra.


We hope that this article has helped you to decide which mic stand will be the best for your podcast recording needs.

You’ll need to make sure that your mic stand is multi-directional and is made with durable material.

Matt Brook

With a background in Journalism and years of experience in the industry, Matt brings a wealth of knowledge to the WiredClip team.

Share This Post

More To Explore